Network Working Group S. Pfeiffer Internet-Draft C. Parker Intended status: Informational A. Pang Expires: September 2, 2005 CSIRO March 2005 The Continuous Media Markup Language (CMML), Version 3.1 draft-pfeiffer-cmml-xx Status of this Memo This document is an Internet-Draft and is subject to all provisions of Section 3 of RFC 3667. By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she become aware will be disclosed, in accordance with RFC 3668. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on September 2, 2005. Copyright Notice Copyright (C) The IETF Trust (2005). Pfeiffer, et al. Expires September 2, 2005 [Page 1] Internet-Draft CMML March 2005 Abstract This specification defines the Continuous Media Markup Language (CMML), version 3.1, an XML-based [XML] markup language for time- continuous data. It is a sister document to the specification of the Annodex [ANX] annotation, indexing and hyperlinking format for time- continuous data. A CMML file is essentially a textual representation of an Annodex file. The tags of a CMML file provide for the creation of structured and unstructured annotations as well as hyperlinks and addressable named anchor points for clips of time-continuous data. Through its import tag, the CMML is also an authoring language for Annodex [ANX] streams. The tag names in use in CMML are similar to the ones in XHTML [XHTML]. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [KEYWORDS]. Pfeiffer, et al. Expires September 2, 2005 [Page 2] Internet-Draft CMML March 2005 Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. The CMML data types . . . . . . . . . . . . . . . . . . . . . 7 2.1. ContentType . . . . . . . . . . . . . . . . . . . . . . . 7 2.2. LinkTypes . . . . . . . . . . . . . . . . . . . . . . . . 7 2.3. MediaDesc . . . . . . . . . . . . . . . . . . . . . . . . 8 2.4. Text . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.5. URI . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2.6. LanguageCode . . . . . . . . . . . . . . . . . . . . . . . 9 2.7. Internationalisation support . . . . . . . . . . . . . . . 9 2.8. Time specifications . . . . . . . . . . . . . . . . . . . 10 2.9. Core Attributes . . . . . . . . . . . . . . . . . . . . . 10 3. The preamble and the 'cmml' root element . . . . . . . . . . . 11 4. The cmml 'stream' tag . . . . . . . . . . . . . . . . . . . . 12 4.1. The 'import' tag . . . . . . . . . . . . . . . . . . . . . 13 4.2. The 'param' tag . . . . . . . . . . . . . . . . . . . . . 14 5. The cmml 'head' element . . . . . . . . . . . . . . . . . . . 16 5.1. The 'title' element . . . . . . . . . . . . . . . . . . . 16 5.2. The 'base' element . . . . . . . . . . . . . . . . . . . . 17 5.3. The 'meta' element . . . . . . . . . . . . . . . . . . . . 17 5.4. The 'link' element . . . . . . . . . . . . . . . . . . . . 18 5.5. The 'style' element . . . . . . . . . . . . . . . . . . . 18 6. The cmml 'clip' tag . . . . . . . . . . . . . . . . . . . . . 20 6.1. The 'meta' element . . . . . . . . . . . . . . . . . . . . 21 6.2. The 'style' element . . . . . . . . . . . . . . . . . . . 21 6.3. The 'a' element . . . . . . . . . . . . . . . . . . . . . 21 6.4. The 'img' element . . . . . . . . . . . . . . . . . . . . 22 6.5. The 'desc' element . . . . . . . . . . . . . . . . . . . . 22 6.6. The 'caption' element . . . . . . . . . . . . . . . . . . 23 6.7. The 'p' element . . . . . . . . . . . . . . . . . . . . . 23 6.8. The 'span' element . . . . . . . . . . . . . . . . . . . . 23 6.9. The 'br' element . . . . . . . . . . . . . . . . . . . . . 23 7. Serialising CMML . . . . . . . . . . . . . . . . . . . . . . . 25 7.1. The format of the CMML ident header packet . . . . . . . . 25 7.2. The format of the CMML secondary headers . . . . . . . . . 26 7.3. The format of the CMML data packets . . . . . . . . . . . 27 8. Mapping CMML into Ogg and Annodex . . . . . . . . . . . . . . 29 8.1. Media mapping for a CMML logical bitstream inside Ogg . . 29 8.2. Using CMML to author Annodex bitstreams . . . . . . . . . 30 8.2.1. Creating the skeleton ident packet . . . . . . . . . . 31 8.2.2. Creating the skeleton fisbone packets . . . . . . . . 31 8.2.3. The CMML fisbone packet fields . . . . . . . . . . . . 32 8.2.4. Usage of the 'stream' tag . . . . . . . . . . . . . . 33 9. Extracting CMML from Annodex bitstreams . . . . . . . . . . . 35 9.1. Extracting the preamble, 'head' and 'clip' tags . . . . . 35 9.2. Creating a 'stream' tag . . . . . . . . . . . . . . . . . 35 10. MIME media type registration for 'text/cmml' . . . . . . . . . 37 Pfeiffer, et al. Expires September 2, 2005 [Page 3] Internet-Draft CMML March 2005 10.1. URI addressing into CMML files . . . . . . . . . . . . . . 37 10.1.1. Query parameters for use with the http protocol server-side . . . . . . . . . . . . . . . . . . . . . 38 10.1.2. Fragment identifiers for use with the http protocol client-side . . . . . . . . . . . . . . . . . 39 11. Security considerations . . . . . . . . . . . . . . . . . . . 40 12. ChangeLog . . . . . . . . . . . . . . . . . . . . . . . . . . 41 13. References . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Appendix A. CMML DTD . . . . . . . . . . . . . . . . . . . . . . 44 Appendix B. An example CMML document . . . . . . . . . . . . . . 45 Appendix C. Definitions of terms and abbreviations . . . . . . . 47 Appendix D. Glossary of acronyms . . . . . . . . . . . . . . . . 48 Appendix E. Acknowledgements . . . . . . . . . . . . . . . . . . 49 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 50 Intellectual Property and Copyright Statements . . . . . . . . . . 51 Pfeiffer, et al. Expires September 2, 2005 [Page 4] Internet-Draft CMML March 2005 1. Introduction The Continuous Media Markup Language (CMML) specifies XML based markup for time-continuous data to allow it to become an integral part of the World Wide Web analogously to how HTML allowed text documents to become part of the Web. Therefore, format of the CMML derives much from XHTML. CMML allows the attachment of free-text annotations, metadata, captions and other textual information to clips of time-continuous data. This provides a timed, textual representation of the data that can be indexed by Web search engines. CMML also allows the attachment of a hyperlink to each clip of time- continuous data, enabling Web search engines to crawl the content. This also allows users to surf seamlessly between time-continuous data and other Web resources, integrating clips of media into the browsing history of a Web browser. CMML also provides a way of referencing a representative image for each clip of time-continuous data, providing a visual representation of the clip in conjunction with the textual representation. The expected usage scenario for this is in the presentation of search results or in a table of clips. CMML provides a "head" element to store information that concerns the complete time-continous resource, and a set of "clip" elements that each store information for a temporal subpart of the resource. The practical use of a CMML file is in conjunction with the Annodex exchange format [ANX]. CMML markup can be interleaved inside an Annodex file or stream to allow a synchronised delivery of marked-up time-continuous data in a single stream between a Web server and a user agent. CMML has also been designed as an authoring language for Annodex bitstreams. It allows the description of time-continuous data bitstream(s) that need to be multiplexed together to create an Annodex bitstream. This information is stored in the "stream" element of a CMML document. Such a document can be used to control the multiplexing process that creates an Annodex file. The following picture illustrates the multiplexing activity schematically; in reality, the stream tag is not preserved in its original form and some attribute values are also encoded in the binary data. Details of how CMML markup is encoded in an Annodex bitstream are given later in this document. Pfeiffer, et al. Expires September 2, 2005 [Page 5] Internet-Draft CMML March 2005 ---------- |stream | CMML ---------- instance | head | document ---------- | clip_1 | ---------------------------------------------------- ---------- | data bitstream in packets | | ... | ---------------------------------------------------- ---------- | | clip_n | | ---------- | | | ------->-<------- | Multiplexing | v --------------------------------------------------------------------- |stream|head|clip_1| data packets |clip_2| data packets ... --------------------------------------------------------------------- The CMML is technically fully specified through its DTD as given in the Appendix. The semantic meaning of each of the tags, their content and their attributes is specified in the following sections. The Appendix also contains an example of a CMML (instance) document. The file extension of CMML files is ".cmml". This document also applies for registration of the mime-type "text/cmml" for CMML files with IANA. In the meantime, "text/x-cmml" will be used. Please note that this document assumes that the reader has a fluent working knowledge of Extensible Markup Language (XML) [XML], Hypertext Markup Language (HTML) [HTML], XHTML [XHTML], Cascading Style Sheets (CSS) [CSS] and the World Wide Web. Basic knowledge about the Annodex [ANX] format is also assumed. Pfeiffer, et al. Expires September 2, 2005 [Page 6] Internet-Draft CMML March 2005 2. The CMML data types At the beginning of the CMML DTD, several parameter entities are defined that are used throughout the DTD as data types. This section gives a brief overview of them and refers to the relevant standards in which they are defined. 2.1. ContentType A "ContentType" specifies the media type and subtype of a document as defined in RFC 2045 [ContentType]. It is used to specify the type of content that one input time-continuous bitstream contains. Examples are "application/annodex", "audio/x-speex", "video/x-theora", or "video/mpeg". 2.2. LinkTypes "LinkTypes" specifies a space-separated list of the types of relationships a linked, i.e. related, document has to the current one. As in XHTML, user agents, search engines, etc. may interpret these link types in a variety of ways. For example, user agents may provide access to linked documents through a navigation bar. Authors may use the following recognized link types which are a superset of the ones used for XHTML/HTML: o edit: Refers to a document that allows editing the resource. This enables a document author to allow others to edit the CMML which is the basis for an Annodex resource. o alternate: Designates substitute versions for the document in which the link occurs. When used together with the media attribute, it implies a version designed for a different medium (or media). o stylesheet: Refers to an external style sheet. o start: Refers to the first document in a collection of documents. This link type tells search engines which document is considered by the author to be the starting point of the collection. o next: Refers to the next document in a linear sequence of documents. User agents may choose to pre-load the "next" document, to reduce the perceived load time. o prev: Refers to the previous document in an ordered series of documents. Pfeiffer, et al. Expires September 2, 2005 [Page 7] Internet-Draft CMML March 2005 o contents: Refers to a document serving as a table of contents. Although this may seem strange in a CMML file, it makes sense in an Annodex file and may simply refer back to the CMML file or to a HTML page that provides similar information. o index: Refers to a document providing an index for the current document. o glossary: Refers to a document providing a glossary of terms that pertain to the current document. o copyright: Refers to a copyright statement for the current document. While this could also be given in the meta tags, this could refer to a formatted, legal document. o chapter: Refers to a document serving as a chapter in a collection of documents. o section: Refers to a document serving as a section in a collection of documents. o subsection: Refers to a document serving as a subsection in a collection of documents. o appendix: Refers to a document serving as an appendix in a collection of documents. o help: Refers to a document offering help (more information, links to other sources information, etc.) o bookmark: Refers to a bookmark. A bookmark is a link to a key entry point within an extended document. The title attribute may be used, for example, to label the bookmark. Note that several bookmarks may be defined in each document. 2.3. MediaDesc A "MediaDesc" describes one or several types of devices for which the given style is appropriate. It is given as a list of comma-separated media descriptors. Which devices are supported will need to be specified in a separate style sheet specification. The following set of device types, adapted from XHTML/HTML in CSS1, are recognized: o all: suitable for all devices. o aural: suitable for speech synthesizers. Pfeiffer, et al. Expires September 2, 2005 [Page 8] Internet-Draft CMML March 2005 o braille: intended for braille tactile feedback devices. o embossed: intended for paged braille printers. o handheld: intended for handheld devices (characterized by a small, monochrome or colour display and limited bandwidth). o print: intended for paged output to a printer or print preview on a screen. o projection: intended for projected presentations (projectors or print to transparencies). o screen: intended for non-paged, colour computer screens. o tty: intended for fixed-pitch character grid displays (such as the teletypes or terminals). o tv: for television-type devices with low resolution and limited scrollability. 2.4. Text A "Text" describes a short, free form text being used for the "title" attribute. 2.5. URI A "URI" is a character string that conforms to the specification of the Uniform Resource Identifier as defined in RFC 3986 [URI]. A URI generally points to a Web resource. The URI time interval specification [timedURI] is supported for CMML and Annodex files. Also, direct addressing of clips as specified in the MIME type application part of this document is supported for CMML and Anndex files. 2.6. LanguageCode The "LanguageCode" defines a collection of constant strings that each identify a specific language as defined in RFC 1766 [LANG]. Examples are: en-au, de, x-klingon. Language codes are used to provide internationalisation support. 2.7. Internationalisation support To provide international language support, the i18n entity draws together a language given by a "LanguageCode" in "lang" with the directionality of that language in "dir" given either as ltr (left- Pfeiffer, et al. Expires September 2, 2005 [Page 9] Internet-Draft CMML March 2005 to-right) or rtl (right-to-left). "ltr" is the default. 2.8. Time specifications There are three different time specifications in use in CMML: "Timestamp", "Playbacktime" and "UTCtime". A "Timestamp" is generally a name-value pair which defines a time point. The time point value is interpreted according to the time scheme given in the name. If the name is ommitted, it defaults to "npt:". Valid time schemes are the ones defined in the temporal URI specification [timedURI]. The "Playbacktime" entity is a data type that just specifies a SMPTE or a NPT time. It is therefore equal to the Timestamp entity without the UTC specification. The "UTCtime" entity is a data type that just specifies a UTC time without an identifier. UTC time is specified as in the Timestamp entity, but without the "clock:" identifier. 2.9. Core Attributes To cluster together the attributes that are common to most displayable elements, the "attrs" entity draws them together. As "i18n" is already a cluster, a "coreattrs" entity is defined, which groups together the other commonly used attributes for displayable elements, namely the unique identifier given in "id", the "class" attribute which provides a space-separated list of style sheet classes that the element belongs to, and the "title" attribute, which provides a short tooltip-like description for an element. Pfeiffer, et al. Expires September 2, 2005 [Page 10] Internet-Draft CMML March 2005 3. The preamble and the 'cmml' root element A CMML file is an XML instance document of the CMML DTD. An example is given in the Appendix. It starts with the usual xml directive and the DTD specification (see http://www.w3.org/TR/REC-xml#sec-prolog-dtd). The following is an example preamble: After the preamble, the CMML tag follows. A CMML file has a "cmml" tag as the root element. It embraces all the other tags. The "cmml" tag encloses at most one "stream" element, exactly one "head" element, and as many "clip" elements as the document author requires. A "clip" element describes a section of the related Annodex bitstream. Attributes of the "cmml" element are the usual xml root tag attributes: the internationalisation attributes "lang" and "dir", an identifier "id", a fixed namespace "xmlns", and the "granulerate". The internationalisation attributes specify the default language (language and directionality) of the complete CMML document. If not given, the language default adheres to the same rules as HTML, where the setting of the HTTP "Content-Language" header may specify the default language of a HTML document received over HTTP, or ultimately the user agent defaults and user preferences set the language. (see http://www.w3.org/TR/REC-html40/struct/dirlang.html) Every element has an "id" attribute. The value of the "id" attribute MUST be unique within the document. It allows to uniquely identify an instance of an element and address it. The "granulerate" attribute may provide a base temporal resolution for the CMML bitstream. This is in particular used for creation of Annodex files from a given CMML instance document. Pfeiffer, et al. Expires September 2, 2005 [Page 11] Internet-Draft CMML March 2005 4. The cmml 'stream' tag The "stream" element contains information that is used for authoring Annodex [ANX] bitstreams from existing time-continuous data. The Annodex bistream is created by multiplexing the bitstreams given in the "src" attributes of the "import" tags of the "stream" element together with the CMML annotations in a time-synchronous manner. The "stream" element describes in the "import" tags the input time- continuous bitstreams that are to be multiplexed together on authoring the Annodex bitstream. Its attributes describe other features of the Annodex bitstream such as the time mappings for the start of the file. The "stream" element has no text attributes and thus internationalisation attributes are not required. The "id" attribute follows the default language specified in the "cmml" element. The "basetime" attribute contains a playback time in seconds associated with the first data packet of the Annodex bitstream. All other times in the CMML file MUST be calculated relative to this basetime. For example, a basetime of 300 seconds npt for a video file implies that the first frame is related to a play time of 300 seconds, and a clip with a start time of 350 seconds is to be included 50 seconds into the Annodex bitstream. If no basetime (or no stream tag) is given, the basetime defaults to 0 npt. The basetime can be given as a SMPTE or NPT time, or as a rational number as in 5/1300, but not as a utc time. The "utc" attribute associates a calendar date and a wall-clock time with the basetime. It therefore provides a mapping of the basetime to a real-world clock time and is given as a UTC time. If it is omitted, the start attribute in the import tag, and the start and end attributes in clip tags MUST NOT be specified as UTC times. The content model of the "stream" tag then proposes an arbitrary number of input bitstreams. These are described one by one in the "import" element. Pfeiffer, et al. Expires September 2, 2005 [Page 12] Internet-Draft CMML March 2005 4.1. The 'import' tag A "import" tag contains information on one of the input bitstreams for the multiplexing process. It may also contain additional parameters to set up the Annodex encoder for each import bitstream. The relevant bitstream (fragment) is referenced through the "src" attribute. The src is a URI and may thus also contain a time interval specification in URIs which narrows down the input file to that given subpart. That resource is multiplexed into the Annodex bitstream starting at the time given in the "start" attribute and ending at the latest at the time given in the "end" attribute. The "start" and "end" attributes are interpreted relative to the timeline of the Annodex bitstream. The internationalisation attributes provide the language of the import element's and the contained param tags' attribute values, such as the "id" attributes and the "title" attribute. The "granulerate" attribute contains the base temporal resolution in Hz of the input bitstream referred in the "src" attribute. It depends on the encoding format of the input bitstream and typically contains the framerate for video (e.g. 25 frames/sec) and the samplerate for audio (e.g. 44100 samples/sec), but may contain any rational number given with an integer denominator larger than 1 sec (e.g. 25 frames on 2 seconds). Each bitstream has its own granulerate dependent on its specific encoding. This attribute is implied as it can be determined automatically during the multiplexing process from the headers of the encoded media bitstream. For bitstreams without header, such as uncompressed audio, the author of the CMML file can provide the granulerate to the multiplexer in this attribute. The "contenttype" attribute specifies the media type [ContentType] of the input bitstream referred in the "src" attribute. It is optional as the media type can often be derived from the file name or file Pfeiffer, et al. Expires September 2, 2005 [Page 13] Internet-Draft CMML March 2005 header of the media source during multiplexing. The "src" attribute specifies a URI to the input bitstream. Commonly used URI schemes are "file" and "http". For specifying temporal subsets of the input bitstream, use the time interval specification for URIs [timedURI]. The "start" attribute specifies a time in the output Annodex bitstream at which the media bitstream will be inserted. This time is specified with respect to the "basetime" attribute given in the "stream" element. The "end" attribute specifies a time in the output Annodex bitstream at which the media bitstream will stop at the latest. This time is also specified with respect to the "basetime" attribute given in the "stream" element. This attribute is not required when the full bitstream is used. The optional "title" attribute provides a chance to jot down a human readable comment on the source bitstream. This may e.g. be used in authoring applications for a more human readable display than the "id" tag which is really a key for identifying elements uniquely. The content model of the "import" tag then allows an arbitrary number of "param" tags to add as many descriptive parameter values to the mulitplexing activity as necessary. 4.2. The 'param' tag A "param" tag is empty, but its attributes contain a name-value pair for describing the input bitstream in the parent "import" element. It inherits its internationalisation from that element, too, to avoid overhead. The "param" element is declared as follows: The "name" attribute identifies a property name. It does not list legal values for this attribute. The "value" attribute specifies a property's value. It does not list legal values for this attribute. An example parametrisation is the provision of machine-processable Pfeiffer, et al. Expires September 2, 2005 [Page 14] Internet-Draft CMML March 2005 low level meta information about the import bitstream such as a video's image height and width and framerate. Pfeiffer, et al. Expires September 2, 2005 [Page 15] Internet-Draft CMML March 2005 5. The cmml 'head' element The CMML "head" element contains annotation information on the complete Annodex bitstream, for whose creation the CMML file is used. It therefore contains header-type information such as a title, style information, related documents and meta information describing the bitstream. The "head" element is declared as the following: The "head" tag must contain a "title" tag. It may contain one "base" tag before or after the "title" tag and any number of "style", "meta", or "link" tags at any position. The "%i18n;" attribute specifies the base language of the "head" tag's attribute values. The value of the "profile" attribute is a space-separated list of base URIs specifying locations of "meta" tag schemes such as the Dublin Core (see http://dublincore.org/). These schemes may be used in the "meta" elements of the "head" or the "clip" tags. 5.1. The 'title' element The "title" tag gives a descriptive title for the complete Annodex bitstream. It is not considered to be part of the presentation and should be displayed, e.g. as the title of the window that the Annodex bitstream is being displayed in. Exactly one title is required per document. The "title" element is declared as the following: The "%i18n;" attribute specifies the base language of the "title" Pfeiffer, et al. Expires September 2, 2005 [Page 16] Internet-Draft CMML March 2005 text. 5.2. The 'base' element The "base" element defines the base URI of the Annodex bitstream. All relative URIs of the bitstream get interpreted relative to this base. The "base" element is empty, but its attributes contain the base URI. It is declared as follows: The "href" attribute contains the base URI. If the "base" element is omitted, the base URI of the Annodex bitstream is derived from the address through which the Annodex bitstream is accessed. 5.3. The 'meta' element The "meta" element in the "head" element defines structured annotations for the complete Annodex bitstream. A "meta" element is empty, but its attributes contain the name-value pairs of a structured annotation. The "meta" element is declared as follows: The "%i18n;" attribute specifies the language of the meta attribute and content texts. The "name" attribute identifies a property name. It does not list legal values for this attribute. The "content" attribute specifies a property's value. It does not list legal values for this attribute. The "scheme" attribute names a scheme to be used to interprete the property's value. The scheme can be located via the "profile" attribute in the "head" element. Pfeiffer, et al. Expires September 2, 2005 [Page 17] Internet-Draft CMML March 2005 5.4. The 'link' element The "link" element in the "head" element defines links to a related external resource. These resources are often used to augment the user agent's ability to process the current document. The "link" element is declared as follows: The "attrs;" attribute covers the specification of the language of the title attribute, a unique identifing name, a reference to a style sheet specification, and a title attribute to provide a short description of the relationship between the current document and the one referred to in the "href" attributed. The "href" attribute contains a URI reference to a related external resource. These resources are often used to augment the user agent's ability to process the current document. The "type" attribute contains a media type specification for the linked document as per RFC 2045 [ContentType], e.g. "text/ x-css-cmml". The "rel" attribute describes the relationship from the current document to the resource specified by the href attribute. The value of this attribute is a space-separated list of link types. The "rev" attribute describes a reverse link from the resource specified by the href attribute to the current document. The value of this attribute is a space-separated list of link types. The "media" attribute specifies the intended destination device for style information, if the href points to an external style sheet. It may be a single media descriptor or a comma-separated list. The default value for this attribute is "screen". 5.5. The 'style' element The "style" element in the "head" element contains an internally defined style sheet. The "style" element is declared as follows: Pfeiffer, et al. Expires September 2, 2005 [Page 18] Internet-Draft CMML March 2005 The "i18n;" attribute containt the language of the title attribute. The "title" attribute contains a short description of the style in human readable form. The "type" attribute contains a media type specification for the linked document as per RFC 2045 [ContentType], e.g. "text/ x-css-cmml". The "media" attribute specifies the intended destination device for the style information. It may be a single media descriptor or a comma-separated list. The default value for this attribute is "screen". Pfeiffer, et al. Expires September 2, 2005 [Page 19] Internet-Draft CMML March 2005 6. The cmml 'clip' tag A CMML file typically contains a number of sections given through "clip" tags. The CMML "clip" tag contains information about a section of the Annodex bitstream. This is expressed in a number of elements and attributes annotating, indexing, and hyperlinking the section. The "start" and "end" attributes are used to give the insertion time for the clip into the Annodex bitstream. Any number of "meta" or "style" elements may appear in a clip, and at most one "a" element, one "img" element, and one "desc" element. Though "meta", "style", "a", "img", and "desc" tag are given in a specific order in the DTD, their order is actually random. The "%i18n;" attributes part of the "%attrs;" attributes specify the base language for all the clip's attribute values and content elements. Also, a unique identifying name is specified for the clip in the "id" attribute. This name can be used in URIs that point either to the CMML file or the Annodex bitstream created from it, and allows to point straight at the clip. This may either be done as a URI fragment or URI query specification. The "class" attribute provides a space-separated list of style sheet classes, and the "title" attribute a short tooltip-like clip description. The "track" attribute specifies the track that this clip belongs to. An annotation track is a set of clips that belong together from a semantic point of view. Clips in the same track must not overlap temporally. A default track must be available always. This track is the one a client (such as a Web browser plugin) will display by default. Other annotation tracks may be created by the document author to describe a more specific content. An example use are different annotation tracks for each speaker in an audio recording of a meeting or tracks of different languages. The "start" and "end" attributes specify the time range during which the clip element is defined. This time range is specified with respect to the "basetime" and "utc" attributes given in the "stream" tag. If the "stream" tag does not contain a "utc" specification, "start" and "end" times are not allowed to be given in UTC time. "start" is a required attribute because a clip without a start time Pfeiffer, et al. Expires September 2, 2005 [Page 20] Internet-Draft CMML March 2005 is useless. "end" is optional and only required where clips cannot continue on to the following clip. 6.1. The 'meta' element The "meta" element is specified above in the "head" section. While a "meta" element in the "head" tag provides meta information for the complete Annodex bitstream, the "meta" elements in a "clip" tag only provide meta information for the clip. 6.2. The 'style' element The "style" element is specified above in the "head" section. While a "style" element in the "head" tag provides style sheet information for the complete Annodex bitstream, the "style" elements in a "clip" tag only provide style sheet information for the clip. 6.3. The 'a' element The "a" element specifies a link to a related Web resource together with some information on that related resource. The "a" element definition is very closely related to the xhtml "a" element definition with a reduced number of attributes as they make sense for time-continuous data. The "attrs" attributes specify internationalisation of the anchor's attribute values and of the anchor text, style sheet class, unique id, and a short, textual description of the hyperlink to be given e.g. in tooltips. The "href" attribute specifies the location of a Web resource given through a URI. It thus defines a link between the current clip and a resource which the author believes to be connected closely to this clip's content. This might be a html page or another Annodex bitstream clip or an image etc. An "a" element without a "href" attribute is illegal and MUST be flagged or ignored. The text contained in an "a" element (i.e. the anchor text) provides a short textual description of the link specified through the "href" attribute. It explains why the connection between the current clip and the destination URI is made. It may e.g. encourage the viewer to follow the link to "Get more information on blah". Pfeiffer, et al. Expires September 2, 2005 [Page 21] Internet-Draft CMML March 2005 6.4. The 'img' element The "img" element specifies the URI of a representative image for the clip. This image should be quite small as it is the representative image (known as "keyframe") for the current clip. This image may be used to visually summarise the content of the clip when a link to it is displayed, e.g. by a search engine or in a table of clips. The "img" element definition is very closely related to the xhtml "img" element definition with a reduced number of attributes as they make sense for time-continuous data. The "attrs" attributes specify internationalisation of the image's attribute values, provide an "id" attribute, a short "title" text, and a style sheet "class" for formatting the layout of the image. The "src" attribute specifies the location of an image on the Web given through a URI. The "alt" attribute specifies alternative text to be displayed instead of the image as required e.g. for accessibility. 6.5. The 'desc' element The "desc" tag contains a human readable, textual description of the content of the clip. The "desc" element is declared as the following: The internationalisation attributes specify the language of the text in the description, the "id" attribute a unique identifier for the element, the "class" attribute a style-sheet mapping, and the "title" attribute a brief description to be displayed in e.g. a table of clips. Pfeiffer, et al. Expires September 2, 2005 [Page 22] Internet-Draft CMML March 2005 6.6. The 'caption' element The "caption" element functions as a logical container for one or more textual content units represented as logical paragraphs. It is created as a simplification of the Timed Text standards of W3C [DFXP]. It is bound by the start and end time of the clip tag in which it is contained. The "caption" element is declared as the following: 6.7. The 'p' element The "p" element contains a human readable piece of text that may be a transcription, caption, sub-title or similar type of textual description of a temporal subsection of the clip tag in which it is contained. The "p" element is declared as the following: 6.8. The 'span' element The "span" element functions as a logical container and a temporal structuring element for a subpart of a textual content unit contained in a 'p' element having inline-level formatting semantics. The "span" element is declared as the following: 6.9. The 'br' element The "br" element denotes an explicit line break. The "br" element is declared as the following: Pfeiffer, et al. Expires September 2, 2005 [Page 24] Internet-Draft CMML March 2005 7. Serialising CMML CMML is an annotation language that is meant to mark up any time- continuous data and be interleaved in a time-synchronous fashion with other time-continuous bitstreams. Therefore, CMML must be able to be serialised into a time-continuous bitstream of data packets. This is described in this section. CMML is serialised by having some initial header pages that set up the CMML decoding environment, and contain header type information. The content of a CMML bitstream then consists of "clip" tags. The "stream" tag is not copied into the CMML bitstream as it controls the authoring of the Annodex bitstream. Its information can be used in the encapsulation format. All of the CMML bitstream information is text. As it gets encoded into a binary bitstream, an encoding format has to be specified. To simplify things, UTF-8 is defined as the mandatory encoding format for all data in a CMML binary bitstream. Also, the encoding process MUST ensure that newline characters are represented as LF (or "\n" in C) only and replace any new line representations that come as CR LF combinations (or "\r\n" in C) with LF only. 7.1. The format of the CMML ident header packet The first header packet of a CMML logical bitstream is the CMML ident header. It contains all information required to identify the CMML bitstream and to set up a CMML decoder. It has the following format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1| Byte +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Identifier 'CMML\0\0\0\0' | 0-3 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | 4-7 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Version major | Version minor | 8-11 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ... The fields in a CMML ident header packet have the following meaning: 1. Identifier: a 8 Byte field that identifies this file to be of a CMML logical input bitstream. It contains the magic numbers: Pfeiffer, et al. Expires September 2, 2005 [Page 25] Internet-Draft CMML March 2005 0x43 'C' 0x4d 'M' 0x4d 'M' 0x4c 'L' 0x00 '\0' 0x00 '\0' 0x00 '\0' 0x00 '\0' 2. Version major: 2 Byte short integer number signifying the major version number of the CMML format bitstream. 3. Version minor: 2 Byte short integer number signifying the minor version number of the CMML format bitstream. When encapsulating a CMML bitstream, more fields may be added to this header as required by the encapsulation or exchange format. 7.2. The format of the CMML secondary headers The CMML secondary headers are a sequence of two packets that contain the CMML and XML "setup" information: o one packet with the CMML xml preamble and "cmml" tag. o one packet with the CMML "head" tag. These packets contain textual, not binary information. The CMML preamble tags are all single-line tags, such as the xml processing instruction () and the document type declaration (). The only CMML tag that is not already serialized from a CMML file is the "cmml" tag, as it encloses all the other content tags. To serialise it, the "cmml" start tag is transformed into a processing instruction, retaining all its attributes (), and the "cmml" end tag is deleted. The first CMML secondary header packet has the following format: Pfeiffer, et al. Expires September 2, 2005 [Page 26] Internet-Draft CMML March 2005 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1| Byte +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ 7.3. The format of the CMML data packets The data packets of the CMML bitstream contain the CMML clip elements. Their "start" and "end" attributes however only exist for authoring purposes and are not copied into the bitstream, but are rather represented through the time mapping of the encapsulation format that interleaves CMML data with data from other time- continuous bitstreams. This avoids contradictory doubly represented timing information. Generally the time mapping is done through some timestamp representation and through the position in the stream. A "clip" tag is encoded with all tags (except for the "start" and "end" attributes) as a string printed into a clip packet. The "clip" tag's "start" attribute tells the encapsulator at what time to insert the clip packet into the bitstream. If an "end" attribute is present, it leads to the creation of another clip packet, unless another clip packet starts on the same track beforehand. This clip packet contains an empty "clip" tag, i.e. a "clip" tag without Pfeiffer, et al. Expires September 2, 2005 [Page 27] Internet-Draft CMML March 2005 "meta", "a", "img" or "desc" elements and no attribute values except for a copy of the "track" attribute from the original "clip" tag. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1| Byte +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Pfeiffer, et al. Expires September 2, 2005 [Page 28] Internet-Draft CMML March 2005 8. Mapping CMML into Ogg and Annodex 8.1. Media mapping for a CMML logical bitstream inside Ogg When mapping a CMML logical bitstream into Ogg, the serialisation as described in the previous section is used as a logical bitstream. The ident packet is extended by a few fields that are necessary for handling the time stamping of the content packets (i.e. the clips) for Ogg. Here is its format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1| Byte +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Identifier 'CMML\0\0\0\0' | 0-3 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | 4-7 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Version major | Version minor | 8-11 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Granulerate numerator | 12-15 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | 16-19 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Granulerate denominator | 20-23 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | 24-27 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Granuleshift | 28 +-+-+-+-+-+-+-+-+ Fields with more than one byte length are encoded LSB (least significant byte) first. The additional fields in an CMML ident header packet for Ogg have the following meaning: 1. Granule rate numerator & denominater: 8 Byte integer number each. They represent the temporal resolution of the logical bitstream in Hz given as a rational number in the same way as the fishead basetime field above. 2. Granuleshift: a 1 Byte integer number describing whether to partition the granule_position into two for the CMML logical bitstream, and how many of the lower bits to use for the partitioning. The upper bits then still signify a time- continuous granule position for a directly decodable and presentable data granule. The lower bits allow for specification Pfeiffer, et al. Expires September 2, 2005 [Page 29] Internet-Draft CMML March 2005 of the granule position of a previous CMML data packet (i.e. "clip" element), which helps to identify how much backwards seeking is necessary to get to the last and still active "clip" element (of the given track). The granuleshift is therefore the log of the maximum possible clip spacing. The default granule rate for CMML is: 1/1000. The default granule shift used is 32, which halves the granule position to allow for the backwards pointer. The media mapping for CMML into Ogg is as follows: o The bos page MUST contain the extended CMML ident packet. o The first secondary header packet of CMML contains the xml preamble as described above. o The second secondary header packet contains the CMML "head" tag as described above. o The content or data packets for CMML contain the CMML "clip" tags each encoded in their own packet and inserted at the accurate time. o The eos page contains a packet with an empty clip tag. If CMML is encapsulated in Ogg without the skeleton bitstream, it potentially loses time information. The basetime will then be mapped always to 0 and utc time mappings cannot be represented. It also loses all the message header fields which contain machine-readable meta information about the physical bitstream. 8.2. Using CMML to author Annodex bitstreams As CMML contains authoring information for Annodex bitstreams, a CMML instance document contains more than just the annotation information necessary for the CMML logical bitstream. It also contains control information to create the control section of an Annodex bitstream, i.e. the skeleton bitstream with its secondary header packets describing each of the contained logical bitstreams. Note that we only describe the creation of Annodex Version 3.0 bitstreams here. The authoring information stems in particular from the "stream" tag plus some specific information from the "cmml" tag. Generally, the "stream" tag's attributes contribute to the skeleton fishead packet, the "import" tag's attributes to the skeleton fisbone packets of each logical bitstream, and the "cmml" tag's attributes to the fisbone of the CMML logical bitstream. While the "cmml" tag is represented in Pfeiffer, et al. Expires September 2, 2005 [Page 30] Internet-Draft CMML March 2005 full as a processing instruction in the secondary header packets of the CMML logical bitstream (see above), this is not the case for the "stream" tag. Therefore, this section also contains a description of what tags of the "stream" tag are not used inside an Annodex bitstream. 8.2.1. Creating the skeleton ident packet The skeleton ident packet receives the "basetime" and the "utc" field information from the "stream" tag. "Basetime numerator & denominator": if the "basetime" attribute is given in a CMML instance document, it MUST be represented in the skeleton ident header in the fields "Basetime numerator" and "Basetime denominator". It is converted from a possible NPT or SMPTE representation to a rational number to be stored in these fishead fields. "Presentationtime numerator & denominator": to be filled by the muxer appropriately, e.g. reusing the basetime values. "UTC": if the "utc" attribute is given in a CMML instance document, it MUST be represented in the skeleton ident header in the "UTC" field. 8.2.2. Creating the skeleton fisbone packets A fisbone packet for a logical bitstream is created through the authoring information of an "import" tag in a CMML instance document's "stream" tag. One "import" tag contains information on one particular logical bitstream in the interleaved bitstream and thus creates one particular skeleton fisbone packet. "Granulerate numerator & denominator": if the "granulerate" attribute is present in the "import" tag, it MUST be represented in the fisbone header for the respective media bitstream in the fields "Granulerate numerator" and "Granulerate denominator". The encoder MUST however ascertain that the values are sensible, and if it knows the accurate granule rate for a logical bitstream overrun the user input with the one that was used during creation of the interleaved bitstream. "Content-type" message header field: this attribute MUST be represented in the respective skeleton fisbone packet as a message header field with name "Content-type", as it signifies the MIME type of the media bitstream, providing for a decoding hint. If the user does not specify the "contenttype" attribute, the encoder MUST provide it during the interleaving process. Pfeiffer, et al. Expires September 2, 2005 [Page 31] Internet-Draft CMML March 2005 "ID" message header field: if an "id" attribute is specified for an "import" tag, it SHOULD be represented in the skeleton fisbone header for the respecitve media bitstream as a message header field with name "ID", as it signifies a short identifying machine-readable string for the import media bitstream. User specified message header fields: if "name" and "value" attributes are specified in the "param" tags of the "import" tag, these SHOULD be represented in the skeleton fisbone packet of the respective media bitstream as a message header field with the given name-value pair. These fields are highly dependent on the type of media bitstream handled and it therefore depends on the encoding tool to make a selection of the parameters acquired. For example, an audio bitstream that contains speech in a specific language may be identified during CMML authoring through a param element with "Content-Language" name, and acquired into the media bitstream message header field of the same name. 8.2.3. The CMML fisbone packet fields A CMML instance document that specifies annotations in "head" and "clip" elements does not get to use the "stream" tag to provide encoding hints for its CMML logical bitstream. Its encoding hints come from the "cmml" tag and the "encoding" attribute of the xml processing directive. "Number of header packets": this field has a fixed size of 3 for the CMML specification given in this document. It counts the CMML ident packet, the XML preamble packet and the head tag packet. "Granulerate numerator & denominator": if the "granulerate" attribute is present in the "cmml" tag, it MUST be represented in the fisbone header in the fields "Granulerate numerator" and "Granulerate denominator". The encoder MUST however ascertain that the values are sensible. The value defaults to "1/1000" if it is not specified by the user. "Content-type" message header field: the content type for the fisbone packet that describes the CMML logical bitstream is fixed at "text/ x-cmml" (or "text/cmml" after IANA registration of the MIME type. "charset": if the xml processing directive contains an "encoding" attribute, this MUST be represented in the CMML fisbone packet as an addendum to the message header field "Content-type" as a charset. For example: "Content-type: text/x-cmml; charset=UTF-8". "ID" message header field: if an "id" attribute is specified for the "cmml" tag, it SHOULD be represented in the skeleton fisbone header Pfeiffer, et al. Expires September 2, 2005 [Page 32] Internet-Draft CMML March 2005 for CMML as a message header field with name "ID", as it signifies a short identifying machine-readable string for the import media bitstream. "Content-Language" and "Content-Dir" message header fields: if the "lang" and "dir" attributes are given in a "cmml" tag, they MUST be represented in the fishbone packet of the CMML bitstream as message header fields with name "Content-Language" and "Content-Dir". 8.2.4. Usage of the 'stream' tag Here is a list of the attribute values of the "stream" tag and how they are being used: o id: not used, as this attribute is only used to enable addressing of the stream tag the XML way (e.g. XPath). It is not relevant for the encoded bitstream and will therefore be lost on encoding. o basetime: this attribute maps to the skeleton ident header fields "Basetime numerator" and "Basetime denominator". o utc: this attribute maps to the skeleton ident header field "UTC". Here is a list of the attribute values of the "import" tag and how they are being used: o id: this attribute may be represented as a message header field in the respective skeleton fisbone packet. o lang, dir: not used, as these attributes signify the language and directionality of the human readable texts in the stream tag which are not acquired into the Annodex bitstream. o granulerate: this attribute is used in the skeleton fisbone header fields "Granule rate numerator" and "Granule rate denominator" as well as for the "Presentationtime numerator" and "Presentationtime denominator". o contenttype: this attribute is represented in the respective skeleton fisbone packet as a message header field with name "Content-type". o src: not used, as this attribute only points to the location of the import media bitstream and is thus pure authoring information. o start, end: not used, as this attribute only specifies the segment of the import media bitstream that is to be used during authoring. Pfeiffer, et al. Expires September 2, 2005 [Page 33] Internet-Draft CMML March 2005 o title: not used, as this attribute provides a human readable comment on the import bitstream for authoring purposes. Here is a list of the attribute values of the "param" tag list and how they are being used: o id: not used, as this attribute is only used to enable addressing of the param tag the XML way (e.g. XPath). It is not relevant for the encoded bitstream and will therefore be lost on encoding. o name, value: these attributes may be represented in the skeleton fisbone packet of the respective media bitstream as a message header field with the given name-value pair. Pfeiffer, et al. Expires September 2, 2005 [Page 34] Internet-Draft CMML March 2005 9. Extracting CMML from Annodex bitstreams The decoding of an Annodex bitstream to CMML is roughly inverse to the encoding of an Annodex bitstream from a CMML file. There are some special cases to take care of, therefore the decoding steps are outlined here. 9.1. Extracting the preamble, 'head' and 'clip' tags The data encoded in the CMML logical bitstream conists of the xml preamble, the "cmml" tag, the "head" tag, and the "clip" tags. These are fairly straightforward to extract. xml preamble and "cmml" tag: The xml preamble is constructed from the second header packet of the CMML logical bitstream. It contains the full xml preamble. It also contains the "cmml" processing instruction, which MUST be transformed back to a normal element and an end "cmml" tag be added at the end of the created CMML document. "head" tag: The "head" tag is constructed from the third header packet of the CMML logical bitstream, which contains the complete content of the "head" element. "clip" tags: The "clip" tags are constructed from the content of the CMML logical bitstream. Each packet contains a "clip" tag with all of the information except for the timing information. A decoder MUST take care to add the start time of each "clip" element into the "start" attribute of the respective CMML "clip" tag. The start time will be calculated from the granulerate in the CMML fisbone packet and the granulepos given in the respective "clip" Ogg packet. Empty "clip" tags should also be converted to end time attributes of the previous "clip" tag on the same track. 9.2. Creating a 'stream' tag The creation of a "stream" tag is not necessary to extract the content of the CMML logical bitstream and thus a textual representation of the interleaved bitstream. However, if the Annodex bitstream has a non-zero "timebase" or a non-null "utc" time in the skeleton ident header, a "stream" tag will allow accurate time information in the CMML file and SHOULD be created with these attribute values. If a "stream" tag is created with the "basetime" and "utc" attributes, it is empty by default. A ripping application MAY however extract all the data bitstreams out of the Annodex bitstream into files, and then reference these files in the "src" attribute of "import" tags. Pfeiffer, et al. Expires September 2, 2005 [Page 35] Internet-Draft CMML March 2005 Other attributes of the "import" tags MAY also be filled from the logical bitstreams: o the "contenttype" attribute from the "Content-type" Message header field of the respective skeleton secondary header packet, o the "granulerate" attribute from the Granulerate fields of the respective skeleton secondary header packet, o the "id" attribute from a Message header field called "ID" if available, o and "param" elements from all the remaining Message header fields of the respective skeleton secondary header packet, where the field name is stored in the "name" attribute and the value in the "value" attribute. A stream tag will thus roughly be created like this: Pfeiffer, et al. Expires September 2, 2005 [Page 36] Internet-Draft CMML March 2005 10. MIME media type registration for 'text/cmml' This section contains the registration information for the 'text/ cmml' media type. While this media type is not approved by the IANA, 'text/x-cmml' may be used to identify CMML instance documents. To: ietf-types@iana.org Subject: Registration of MIME media type 'text/cmml' MIME media type name: text MIME subtype name: cmml Required parameters: none Optional parameters: charset (as in the text/xml media type [text/ xml]). Encoding Considerations: as appropriate for the charset and the transport mechanism (see text/xml media type [text/xml]). Security considerations: see next section. Interoperability considerations: CMML is a free specification that is independent of any media encoding format. It is designed to provide interoperability with existing XML tools and systems. Its specification is not patented and can be implemented by third parties without patent considerations. Additional information: Magic numbers: none. However, CMML files start with the XML preamble as any XML document [text/xml] and will also have the string '. [CSS] Lie, H. and B. Bos, "Cascading Style Sheets, level 1", W3C CSS, January 1999, . [CSS2] Bos, B., Lie, H., Lilley, C., and I. Jacobs, "Cascading Style Sheets, level 2", W3C CSS, May 1998, . [ContentType] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996, . [DFXP] Adams, G., "Timed Text (TT) Authoring Format 1.0 - Distribution Format Exchange Profile (DFXP)", W3C DFXP, November 2006, . [HTML] World Wide Web Consortium, "HTML 4.01 Specification", W3C HTML, December 1999, . [ISO8601] ISO, TC154., "Data elements and interchange formats -- Information interchange -- Representation of dates and times", ISO 8601, 2000. [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate Requirements Levels", RFC 2119, BCP 14, March 1997. [LANG] Alvestrand, H., "Tags for the Identification of Languages", RFC 1766, March 1995, . [RTSP] Schulzrinne, H., Rao, A., and R. Lanphier, "Real Time Streaming Protocol (RTSP)", RFC 2326, April 1998, . [SMPTE] The Society of Motion Picture and Television Engineers, "SMPTE STANDARD for Television, Audio and Film - Time and Control Code", ANSI 12M-1999, September 1999. Pfeiffer, et al. Expires September 2, 2005 [Page 42] Internet-Draft CMML March 2005 [URI] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifiers (URI): Generic Syntax", RFC 3986, January 2005, . [XHTML] World Wide Web Consortium, "XHTML(TM) 1.0 The Extensible Hyper Text Markup Language", W3C XHTML, January 2000, . [XML] World Wide Web Consortium, "Extensible Markup Language (XML) 1.0", W3C XML, October 2000, . [text/xml] Whitehead, E. and M. Murata, "XML Media Types", RFC 2376, July 1998, . [timedURI] Pfeiffer, S., Parker, C., and A. Pang, "Specifying time intervals in URI queries and fragments of time-based Web resources (work in progress)", I-D draft-pfeiffer-temporal-fragments-03.txt, March 2005, . Pfeiffer, et al. Expires September 2, 2005 [Page 43] Internet-Draft CMML March 2005 Appendix A. CMML DTD INCLUDE DTD HERE Pfeiffer, et al. Expires September 2, 2005 [Page 44] Internet-Draft CMML March 2005 Appendix B. An example CMML document Types of fish Read more about fish This is the introduction to the film Joe made about fish.

This is a left aligned subtitle.

This is a right aligned subtitle.

Here, Joe caught sight of a dolphin in the ocean.

This is a lengthy
subtitle that is split over two lines.

More video clips on goldfish. Joe has a fishtank at home with many colourful fish. The common goldfish is one of them and Joe's favourite. Here are some fabulous pictures he has taken of them. Pfeiffer, et al. Expires September 2, 2005 [Page 45] Internet-Draft CMML March 2005 Pfeiffer, et al. Expires September 2, 2005 [Page 46] Internet-Draft CMML March 2005 Appendix C. Definitions of terms and abbreviations Mark-up: XML tags and their content used to describe a document. Annotating: The task of authoring mark-up for a document thus creating a Web resources. Hyperlinking: The task of linking from one Web resource to another. When a link contains a fragment offset into a resource, this is called "deep hyperlinking". Clip: A section of a time-continuous document covering some temporal interval. Indexing: The task of identifying index points or clips for time- continuous documents. Annotation track: A set of clips representing semantically correlated annotations of a time-continuous resource. Annodex bitstream: A specific file format for storing annotation, hyperlinking, and indexing information in annotation tracks and multiplexed together with the time-continuous documents they describe. Bitstream: A sequence of data containing samples of a time-continous document. Time-continuous document: A file containing time-sampled data in a temporally sequential manner. Pfeiffer, et al. Expires September 2, 2005 [Page 47] Internet-Draft CMML March 2005 Appendix D. Glossary of acronyms Annodex: Annotated and indexed bitstream format. CMML: Continuous Media Markup Language. CSS: Cascading Style Sheets. DTD: Document Type Declaration. XML: eXtensible Markup Language. Web: World Wide Web. URI: Unified Resource Identifier. Pfeiffer, et al. Expires September 2, 2005 [Page 48] Internet-Draft CMML March 2005 Appendix E. Acknowledgements The authors greatly acknowledge the contributions of Zentaro Kavanagh, Andrew Nesbit and Simon Lai in developing this specification. Pfeiffer, et al. Expires September 2, 2005 [Page 49] Internet-Draft CMML March 2005 Authors' Addresses Silvia Pfeiffer Commonwealth Scientific and Industrial Research Organisation CSIRO, Australia PO Box 76 Epping, NSW 1710 Australia Phone: +61 2 9372 4180 Email: Silvia.Pfeiffer@csiro.au URI: http://www.ict.csiro.au/ Conrad D. Parker Commonwealth Scientific and Industrial Research Organisation CSIRO, Australia PO Box 76 Epping, NSW 1710 Australia Phone: +61 2 9372 4222 Email: Conrad.Parker@csiro.au URI: http://www.ict.csiro.au/ Andre T. Pang Commonwealth Scientific and Industrial Research Organisation CSIRO, Australia PO Box 76 Epping, NSW 1710 Australia Phone: +61 2 9372 4222 Email: Andre.Pang@csiro.au URI: http://www.ict.csiro.au/ Pfeiffer, et al. Expires September 2, 2005 [Page 50] Internet-Draft CMML March 2005 Full Copyright Statement Copyright (C) The IETF Trust (2005). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Pfeiffer, et al. Expires September 2, 2005 [Page 51] o http://example.com/sample.cmml?id="dolphin" --- sample.cmml is transferred from the start time of the "dolphin" clip to the end of the file/stream. o http://example.com/sample.cmml?id="dolphin/" --- sample.cmml is transferred from the start time of the "dolphin" clip to the end of the file or stream. o http://example.com/sample.cmml?id="dolphin/goldfish" --- sample.cmml is transferred from the start time of the "dolphin" clip to the end of the "goldfish" clip. Note that id attribute values of all elements have to be unique throughout a XML file (and thus also throughout a CMML file). 10.1.2. Fragment identifiers for use with the http protocol client-side For the purposes of URI fragment specifications on CMML files, it is assumed that the fragment gets interpreted by the HTTP client after the retrieval action. The HTTP client is expected to restrict the usage of the resource to the specified interval. Temporal fragment specification: Addressing of temporal intervals of CMML files is possible through specification of temporal fragments in URIs [timedURI]. An example is the following URI: http://example.com/sample.cmml#t=npt:4 . This then relates to the last clip whose start time is just before the given temporal offset and all the clips thereafter. This may e.g. be useful to do a zoom into a retrieved CMML resource. Clip specification: The values of the id attribute of the clip tags can be used for addressing media clips directly through fragment identifiers as in http://example.com/sample.cmml#dolphin. Pfeiffer, et al. Expires September 2, 2005 [Page 39] Internet-Draft CMML March 2005 11. Security considerations As CMML is a markup language created by using XML, the same security considerations that apply to XML [text/xml], apply to CMML. As the CMML is an authoring language for Annodex bitstreams, there is no executable code attached to this language. The implementation of a multiplexer to actually create an Annodex bitstream must be careful when handling input bitstreams, which are binary data. Pfeiffer, et al. Expires September 2, 2005 [Page 40] Internet-Draft CMML March 2005 12. ChangeLog draft-pfeiffer-cmml-01: o CMML version 2.0: changes to the tags to make CMML more similar to XHTML, in particular from "media" to "import", the introduction of an "img" tag, and the the change from an "a" tag that covers all the other elements to a "clip" tag, reducing the "a" tag back to its HTML meaning. draft-pfeiffer-cmml-02: o CMML was not changed - only the media mapping into Annodex was adapted because the binary format had changed substantially. draft-pfeiffer-cmml-03: o added the link tag to the head, which has recognized link types of html plus "edit". o added granulerate to the cmml root tag and changed the muxing description for CMML tracks. o added title tags for each element. o replaced timebase with basetime as a better name. o kept the basetime attribute of the stream tag for backwards compatibility. draft-pfeiffer-cmml-04: o CMML version 3.0: extending the CMML with tags that allow stylesheet specifications for the presentation of the CMML tags, adds the link tag, the title and class attributes, and renames "timebase" to "basetime" as that is the more accurate term used in the industry. draft-pfeiffer-cmml-05: o CMML version 3.1: extending the CMML with a caption and p tags that allow the creation of tags, captions, subtitles and similar. Pfeiffer, et al. Expires September 2, 2005 [Page 41] Internet-Draft CMML March 2005 13. References [ANX] Pfeiffer, S., Parker, C., and A. Pang, "The Annodex exchange format for time-continuous data files, Version 3.0 (work in progress)", I-D draft-pfeiffer-annodex-02.txt, March 2005, . [CSS] Lie, H. and B. Bos, "Cascading Style Sheets, level 1", W3C CSS, January 1999, . [CSS2] Bos, B., Lie, H., Lilley, C., and I. Jacobs, "Cascading Style Sheets, level 2", W3C CSS, May 1998, . [ContentType] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies", RFC 2045, November 1996, . [DFXP] Adams, G., "Timed Text (TT) Authoring Format 1.0 - Distribution Format Exchange Profile (DFXP)", W3C DFXP, November 2006, . [HTML] World Wide Web Consortium, "HTML 4.01 Specification", W3C HTML, December 1999, . [ISO8601] ISO, TC154., "Data elements and interchange formats -- Information interchange -- Representation of dates and times", ISO 8601, 2000. [KEYWORDS] Bradner, S., "Key words for use in RFCs to Indicate Requirements Levels", RFC 2119, BCP 14, March 1997. [LANG] Alvestrand, H., "Tags for the Identification of Languages", RFC 1766, March 1995, . [RTSP] Schulzrinne, H., Rao, A., and R. Lanphier, "Real Time Streaming Protocol (RTSP)", RFC 2326, April 1998, . [SMPTE] The Society of Motion Picture and Television Engineers, "SMPTE STANDARD for Television, Audio and Film - Time and Control Code", ANSI 12M-1999, September 1999. Pfeiffer, et al. Expires September 2, 2005 [Page 42] Internet-Draft CMML March 2005 [URI] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifiers (URI): Generic Syntax", RFC 3986, January 2005, . [XHTML] World Wide Web Consortium, "XHTML(TM) 1.0 The Extensible Hyper Text Markup Language", W3C XHTML, January 2000, . [XML] World Wide Web Consortium, "Extensible Markup Language (XML) 1.0", W3C XML, October 2000, . [text/xml] Whitehead, E. and M. Murata, "XML Media Types", RFC 2376, July 1998, . [timedURI] Pfeiffer, S., Parker, C., and A. Pang, "Specifying time intervals in URI queries and fragments of time-based Web resources (work in progress)", I-D draft-pfeiffer-temporal-fragments-03.txt, March 2005, . Pfeiffer, et al. Expires September 2, 2005 [Page 43] Internet-Draft CMML March 2005 Appendix A. CMML DTD INCLUDE DTD HERE Pfeiffer, et al. Expires September 2, 2005 [Page 44] Internet-Draft CMML March 2005 Appendix B. An example CMML document Types of fish Read more about fish This is the introduction to the film Joe made about fish.

This is a left aligned subtitle.

This is a right aligned subtitle.

Here, Joe caught sight of a dolphin in the ocean.

This is a lengthy
subtitle that is split over two lines.

More video clips on goldfish. Joe has a fishtank at home with many colourful fish. The common goldfish is one of them and Joe's favourite. Here are some fabulous pictures he has taken of them. Pfeiffer, et al. Expires September 2, 2005 [Page 45] Internet-Draft CMML March 2005 Pfeiffer, et al. Expires September 2, 2005 [Page 46] Internet-Draft CMML March 2005 Appendix C. Definitions of terms and abbreviations Mark-up: XML tags and their content used to describe a document. Annotating: The task of authoring mark-up for a document thus creating a Web resources. Hyperlinking: The task of linking from one Web resource to another. When a link contains a fragment offset into a resource, this is called "deep hyperlinking". Clip: A section of a time-continuous document covering some temporal interval. Indexing: The task of identifying index points or clips for time- continuous documents. Annotation track: A set of clips representing semantically correlated annotations of a time-continuous resource. Annodex bitstream: A specific file format for storing annotation, hyperlinking, and indexing information in annotation tracks and multiplexed together with the time-continuous documents they describe. Bitstream: A sequence of data containing samples of a time-continous document. Time-continuous document: A file containing time-sampled data in a temporally sequential manner. Pfeiffer, et al. Expires September 2, 2005 [Page 47] Internet-Draft CMML March 2005 Appendix D. Glossary of acronyms Annodex: Annotated and indexed bitstream format. CMML: Continuous Media Markup Language. CSS: Cascading Style Sheets. DTD: Document Type Declaration. XML: eXtensible Markup Language. Web: World Wide Web. URI: Unified Resource Identifier. Pfeiffer, et al. Expires September 2, 2005 [Page 48] Internet-Draft CMML March 2005 Appendix E. Acknowledgements The authors greatly acknowledge the contributions of Zentaro Kavanagh, Andrew Nesbit and Simon Lai in developing this specification. Pfeiffer, et al. Expires September 2, 2005 [Page 49] Internet-Draft CMML March 2005 Authors' Addresses Silvia Pfeiffer Commonwealth Scientific and Industrial Research Organisation CSIRO, Australia PO Box 76 Epping, NSW 1710 Australia Phone: +61 2 9372 4180 Email: Silvia.Pfeiffer@csiro.au URI: http://www.ict.csiro.au/ Conrad D. Parker Commonwealth Scientific and Industrial Research Organisation CSIRO, Australia PO Box 76 Epping, NSW 1710 Australia Phone: +61 2 9372 4222 Email: Conrad.Parker@csiro.au URI: http://www.ict.csiro.au/ Andre T. Pang Commonwealth Scientific and Industrial Research Organisation CSIRO, Australia PO Box 76 Epping, NSW 1710 Australia Phone: +61 2 9372 4222 Email: Andre.Pang@csiro.au URI: http://www.ict.csiro.au/ Pfeiffer, et al. Expires September 2, 2005 [Page 50] Internet-Draft CMML March 2005 Full Copyright Statement Copyright (C) The IETF Trust (2005). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgment Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA). Pfeiffer, et al. Expires September 2, 2005 [Page 51]